Click on class below to take you to the rules for that class. For Dacotah Speedway Rules/Procedures and Hobby Stocks rules, see the above Navigation bar.IMCA Modifieds and Sport CompactsWissota Street StocksINEX Legends
Transponder Installation Specifications
Modifieds: Right side on the mid plate.
Legends: Right rear upright where the pan hard bar is mounted. Or the same upright on the left side.
StreetStocks: Wissota Mandates Transponder Location for Street Stocks. Street Stocks must have the transponder mounted on the right side, inside the frame, approximately 21-23 inches behind the lower ball joint.
HobbyStocks: Must have the transponder mounted on the right side, insidethe frame, approximately 21-23 inches behind the lower ball joint. (On the right side.)
IMCA Sport Compact's: To the rear, 24 inches. Measured from the centerline of the rear axle to the centerline of the transponder.
General Mounting Instructions
Alltransponders will be mounted on the passenger (right side). Use yourskill to make the necessary mount.
Mountas low as possible, slightly above the lower frame rail or the lowestprotected point. 24 inches is the maximum, but should be avoided tokeep a strong signal.
Your measurement should be accurate to less than 1 inch.
Avoid or protect from exhaust heat.
Mount securely; you don’t want it to fall off during the race.
The center line of the transponder will be the arrow on the body or on the bracket. The arrow shows the mounting direction.